Many FDA-regulated manufacturers find themselves without the resources or processes to efficiently manage product complaints. When the resulting backlog isn’t cleared quickly and completely, the issue can compound into serious safety and compliance problems requiring many hours of work to resolve.
Here, we present eight complaint-handling problems that can lead to complaint backlogs and generalized strategies for remediation.
These scenarios were compiled by The FDA Group's Alan Greathouse, a regulatory compliance expert with extensive experience identifying the causes of complaint backlogs and working to develop efficient and effective ways to remediate them in companies large and small, all over the world.
Each of these problems was experienced firsthand and solved through a tailored remediation program we've generalized for generic use.
This is an excerpt from our extensive white paper: Clearing Complaint Backlogs: A Guide to Efficient Complaint Management.
Experiencing a complaint backlog right now? Contact us today to get expert complaint handling and/or backlog reduction assistance from an experienced regulatory consultant.
While those receiving complaints from the field are typically experienced complaint handlers, those submitting complaints from the field should also be able to accurately discern genuine complaints from field incidents.
When too many field incidents enter your intake disguised as complaints, valuable time and energy is robbed from those triaging and investigating these issues.
Solution StrategyEnsure the field technicians pushing complaints into the system have sufficient training in the basics of the complaint investigation and are capable of identifying and resolving issues associated with the specific devices they commonly interface with. Technicians should be able to identify problems when they encounter them and separate complaints from field incidents using indicators in the field. |
Thorough complaint investigations rely on good thorough record-keeping. When field technicians fail to capture the information needed, time is wasted tracking that information down. Worse still, serious problems can fly under the radar due to improper processing.
A “broken hose,” for example, isn’t useful as an entry when the device has twenty hoses attached to it. The level of detail provided must be appropriate to the complexity of the specific device in question.
Solution StrategyDetermine whether or not reports from the field are being submitted with complete, useful information and consider hands-on training around specific devices to ensure field technicians know which details are critical to include. Everyone must understand what information is needed to make a complaint actionable. Pay special attention to the areas that typically go under-explained:
|
In the medical device space, malfunctioning or damaged equipment must be returned to the manufacturer to conduct a physical investigation of the unit.
Too often, though, under-trained field technicians unknowingly sabotage the complaint process from the start by disposing of problematic devices on-site, making it impossible to investigate.
Solution StrategyAnalyze complaint problems resulting from insufficient information from the field to determine if improper handling or other lapses can be dealt with by improving processes, training, or both. Review all processes related to collecting damaged or malfunctioning products to ensure equipment isn’t being disposed of or altered further. |
“When it comes to complaint intake, there has to be a fluid interchange between those in the field and those back home assessing the complaint. In many cases, field techs should have a background in complaint investigation. That way, they truly understand the problem and can determine whether or not what they’re seeing in front of them is a genuine complaint or just a field incident.”
Alan Greathouse, The FDA Group
Products sold in several markets must be supported by a complaint management system free of translational hiccups. Companies extending their reach around the world have to bring their processes along for the ride. A complaint handling group used to processing complaints in one language can’t be expected to be as effective when they’re asked to process complaints from three or four.
Physical problems compound this. When problematic devices are returned to somewhere other than where the complaint handling group resides, for example, another group—sometimes in a different country—must step in to provide the complaint handlers with the information they need.
This extra step, while likely convenient from a logistical standpoint, only invites inefficiency elsewhere, leading to a possible backlog in addition to missed information.
Solution StrategyEvery preventable step of translation should, in fact, be prevented. Ideally, this is accomplished by localizing the complaint management group to the region the devices are located in. English complaints should be handled by fluent English speakers. Chinese complaints should be handled by fluent Chinese speakers. Nuance and detail—two things that are critical in handling complaints—are often the first things lost in translation. Recognizing this and being willing to act on it can have a massive impact on complaint process efficiency. |
“I worked with a company with a backlog that was, in part, due to a complaint group in Europe that was handling complaints about devices they didn’t even manufacture. Those handling them had very limited knowledge of that device. More importantly, when the device was returned, it was returned to a site in the United States. This kind of problem makes for a very poor process. You’re asking people, one, ‘you have to translate it from English to German’ if they don’t read and write English. Then, before it gets put into the U.S. system, it has to be translated back. That’s a massive opportunity for error.”
Alan Greathouse, The FDA Group
It’s a hard question for internal teams to answer objectively (and why they often hire consultants to answer it for them): Are there adequate procedures for those handling complaints to follow? More precisely, can someone pick up the procedure, read it, and actually perform the process without having to work from memory?
Solution StrategyIf the answer to these questions is anything but a resounding “yes,” it’s time to put the procedure under the microscope. While it’s impossible to give concrete advice as to what a complaint-handling procedure should contain, let’s discuss four essentials common among the most effective:
|
Complaints should be assigned a risk number and prioritized accordingly. However, many complaint handlers are not qualified to perform the level of analysis required for this task.
Assigning risk accurately and consistently typically requires the expertise of a product engineer who has a thorough understanding of how to use the software that assigns risk numbers, as well as the factors that software is analyzing to arrive at its answer.
Solution StrategyDevelop the training needed to make complaint handlers genuine experts on risk. This should include a thorough understanding of the software used to assign risk numbers and the process the software uses to do so. Common software issues and user errors should be presented with solutions and mitigation strategies during the training. Product engineers should be tapped as subject matter experts to ensure the training is adequate and actionable. |
Improperly classifying complaints can spark a cascade of compounding problems. It skews complaint analytics, tracking, and trending. It’s also something regulators make a point of looking for (and routinely issue observations for) as it can result in MDRs not getting filed when they need to be. Improper classification not only causes backlogs but can create a barrier to eliminating them by introducing the tedious task of re-opening and re-investigating closed files.
Solution StrategyIf a backlog currently exists, evaluate a sample of complaints to understand whether or not classification is an issue and the extent of remediation required to resolve the problem in full. In general, revisit the decision-making process for complaint classification to ensure handlers are considering all important data points and making decisions consistently. |
“In one backlog remediation project, we were told that none of the 2,500 complaints needed an MDR. That didn’t turn out to be true. We found complaints that were two or three years old that never had MDRs filed. The industry expectation is 30 days to file. Not only were there MDRs to file, but we also ended up having to go back and open closed complaints to fill out additional supplemental documents and do further investigation. In some cases, complaints were just misclassified. The risk was inappropriately assigned. So, we had to go in and fill out what’s called supplemental forms, which, as you can imagine, that’s like a whole other investigation in itself, so you’re doing double and triple the work when you do improper investigation up front.”
Alan Greathouse, The FDA Group
Poor alignment between cross-functional teams can let complaints sit partially completed as they wait for someone’s input. When complaints aren’t prioritized by a critical function, a few complaints can lead to a lengthy backlog by bottlenecking the entire process.
Solution StrategyEvaluate weak links in the chain of cross-functional input. Are complaints stalling in a particular area? Reexamine the organizational structure and offer guidance on priorities for teams who let complaints lag behind. |
When discovered by regulators, the first and most obvious consequence of a complaint backlog is a written observation. This could cite improper investigation and, in some cases, inadequate quality oversight.
Like any observation, expect this to trigger much more digging. Regulators will likely examine your processes and the backlogged files themselves to determine what is causing the delay.
Complaints indicating missed MDRs or unknown patient risks will very likely lead to critical observations and/or warning letters or other serious enforcement action.
We recognize the challenges of developing and managing an effective postmarket surveillance program under the watchful eye of regulators in a quickly-changing landscape. Our consultants draw on years of experience, highly specialized skills, and best practices developed through work in the field to ensure objective, accurate, and actionable recommendations are made each step of the way.
Our proprietary talent selection process brings together a diverse array of skill sets, experience, and expertise to offer a truly unique opportunity for companies interested in receiving personal and professional attention.
Contact us today to clear your backlog and improve your postmarket surveillance processes today.
FREE WHITE PAPER
Grab our free white paper and learn more about clearing complaint backlogs, effectively and efficiently.